![Diff](/lib/images/diff.png)
Approvals: 0/1
This is an old revision of the document!
Queue | Partition setup on VSC-5
On VSC-5, the type of hardware and the quality of service (QOS) where the jobs run on may be selected. Nodes of the same type of hardware are grouped to partitions, the QOS defines the maximum run time of a job and the number and type of allocate-able nodes.
Hardware types
There are three basic types of hardware that differ in architecture:
- Intel CPU nodes: there is only one variant with Cascadelake CPUs and 368GB RAM.
- AMD CPU nodes: they all have Zen3 CPU nodes, but come in three memeory versions - 512GB, 1TB and 2TB RAM.
- GPU nodes: there are two versions, one with Zen2 CPUs, 256GB RAM and 2x nVidia A40 GPUs, and one with Zen3 CPUs, 512GB RAM and 2x nVidia A100 GPUs.
On VSC-5, the hardware is grouped into so-called <html><font color=#cc3300>➠ partitions</font></html>:
partition name | description |
---|---|
cascadelake_0384 | Intel CPU nodes |
zen3_0512 | default, AMD CPU nodes with 512GB of memory |
zen3_1024 | AMD CPU nodes with 1TB of memory |
zen3_2048 | AMD CPU nodes with 2TB of memory |
zen2_0256_a40x2 | GPU nodes with 2x nVidia A40 |
zen3_0512_a100x2 | GPU nodes with 2x nVidia A100 |
jupyter | reserved for the JupyterHub |
Quality of service (QOS)
Access to node partitions is granted by the so-called <html><font color=#cc3300>➠ quality of service (QOS)</font></html>. The QOSs constrain the number of allocate-able nodes and limit job wall time. The naming scheme of the QOSs is: <project_type>_<memoryConfig>
The QOSs that are assigned to a specific user can be viewed with:
sacctmgr show user `id -u` withassoc format=user,defaultaccount,account,qos%40s,defaultqos%20s
The default QOS and all QOSs usable are also shown right after login.
Generally, it can be distinguished in QOS defined on the generally available compute nodes and on private nodes. Furthermore, there is a distinction whether a project still has available computing time or if the computing time has already been consumed. In the latter case, jobs of this project are running with low job priority and reduced maximum run time limit in the <html><font color=#cc3300>➠ idle queue</font></html>.
The <html><font color=#cc3300>➠ devel queue</font></html> gives fast feed-back to the user if her or his job is running. It is possible to connect to the node where the actual job is running and to directly monitor the job, e.g., for the purpose of checking if the threads/processes are doing what is expected. This might be recommended before sending the job to one of the 'computing' queues.
Run time limits
The QOS's hard run time limits | |
---|---|
zen3_0512 / zen3_1024 / zen3_2048 / cascadelake_0384 / zen2_0256_a40x2 / zen3_0512_a100x2 | 72h (3 days) |
idle_0512 / idle_1024 / idle_2048 (there is no idle on cascadelake or GPUs) | 24h (1 day) |
private queues p….._0… | up to 240h (10 days) |
zen3_0512_devel (up to 5 nodes available) | 10min |
The QOS's run time limits can also be requested via the command
sacctmgr show qos format=name%20s,priority,grpnodes,maxwall,description%40s
SLURM allows for setting a run time limit below the default QOS's run time limit. After the specified time is elapsed, the job is killed:
#SBATCH --time=<time>
Acceptable time formats include “minutes”, “minutes:seconds”, “hours:minutes:seconds”, “days-hours”, “days-hours:minutes” and “days-hours:minutes:seconds”.
sbatch parameters
For submitting jobs, three parameters are important:
#SBATCH --partition=xxxxx_xxxx #SBATCH --qos=xxxxx_xxxx #SBATCH --account=xxxxxx
The core hours will be charged to the specified account. If not specified, the default account (sacctmgr show user `id -u` withassoc format=defaultaccount
) will be used.
ordinary projects
For ordinary projects the QOSs are:
QOS name | gives access to partition | description |
---|---|---|
skylake_0096 | skylake_0096 | default |
skylake_0384 | skylake_0384 | |
skylake_0768 | skylake_0768 | |
skylake_devel_0096 | 5 nodes on skylake_0096 |
examples
#SBATCH --partition=skylake_0096 #SBATCH --qos=skylake_0096 #SBATCH --account=p7xxxx
- Note that partition, qos, and account have to fit together.
- If the account is not given, the default account (
sacctmgr show user `id -u` withassoc format=defaultaccount
) will be used. - If partition and qos are not given, default values are mem_0096 for both.
private nodes projects
example
#SBATCH --partition=skylake_0384 #SBATCH --qos=p7xxx_xxxx #SBATCH --account=p7xxxx